Graphic Voltage Controllers & T/R Controls for ESPs
NWL’s Graphic Voltage Controller (GVC) has industry-leading speed and strong visual user interface screen for use with electrostatic precipitators (ESPs). A voltage control is used with a single phase silicon controlled rectifier (SCR) based power supply topology.
Overview
Graphic Voltage Controllers and Transformer/Rectifier (T/R) Controls for Electrostatic Precipitator Controls
This control modulates the SCRs on and off in response to operating conditions inside of the precipitator. The control should operate in one of two conditions, spark rate or transformer nameplate rating limited if not being controlled by one of the GVC’s many other control features. The current design has an upgraded micro-processor for speed, along with a color graphical user interface with a tactile screen, simplified software, easy-to-use navigation and improved overall usability. The new tactile screen is called the Global Display Unit (GDU).
The GVC control utilizes Digital Signal Processing (DSP) to increase microprocessing speed and shorten response time on key control functions. The GVC is designed for easy installation into new or existing voltage control enclosures. The GDU is designed to be used in either a one-to-one or one-to-many arrangement to fit the end user’s budget requirements.
Features
The GVC offers the following features:
- DSP for fast spark and arc responses and control
- Back corona detection and control
- Redundant communication options
- User selectable communication protocols
- Easy retrofitting
- On-board trending
- VI curve generation
- Built-in oscilloscope function
- Integrates with NWL Precipitator Control and Management System (PCAMS)
- Integrates with NWL Graphic Rapper Control (GRC)
- Monitoring and alarm functions
- Compatible with global voltages
- Works with all manufacturers transformer rectifiers controlled by silicon controlled rectifiers
- SD-Card and USB Flash drive ports for data download and firmware updates
- IP65 / NEMA 4 rated HMI display
Product Announcement
NWL has significantly advanced its GVC control module technology with the latest electronics and communications devices. All these components are surface mounted for greater reliabilty. The heart of the upgrade is a new Texas Instruments Digital Signal Processor (DSP), which samples over 75,000 feedback signals every second; in contrast, most ESP voltage controllers on the market today sample at a rate of 100/sec.
A second major feature is the optional Anybus module (from HMS Industrial Networks), which enables communication between the SCR controls and a central control system (DCS or SCADA) in the absence of an NWL PCAMS interface system.
The new processor will enable monitoring of peak voltage (Vpeak) and provide better immunity to line noise (SCR gating effects) owing to the phased lock loop design within the processor. An SD card slot is included on the DSP board and can be used to facilitate loading of future product enhancement software. A 4-character LED display is located on the board for at-a-glance diagnostics.
The part number for the new GVC control module is G20808-01. This module is a wire-for-wire replacement for older board sets; rewiring of the I/O is the only installation step. The module is compatible with these hand held display models:
- G20805A
- G20805B
- G20805C
A firmware upgrade will be necessary in order to properly integrate the control module with an existing display. Older displays will need to be replaced to take full advantage of the new features. Retrofit kits will be available in the following options:
- Control module only
- Control module and display
- Control module and trigger board
- Control module, trigger board, and display
Resources
Technical Information
Certifications
NWL is an AS9100:2016 and ISO 9001:2015 certified manufacturer of transformers and power supplies for industrial applications and also provides a CE Declaration of Conformity for its PowerPlus switch mode power supply (SMPS).
Related services
Related services
NWL provides service and support for electrostatic precipitators (ESP), power supplies, transformers and inductors.
If the NWL equipment was supplied or acquired as part of a system from another firm, please contact that company for any service needs. If they are unable to satisfy the service requirements, then contact NWL
Startup and Commissioning
NWL’s expertise goes well beyond the production phase. Our fully trained personnel are ready to help you get your new equipment connected, properly set up, and running efficiently. Our service technicians and engineers have traveled across the globe, working with customers from various backgrounds and experiencing every possible environment.
Maintenance and Repair
NWL products are available for purchase as spare or replacement parts. We offer tailor-made maintenance packages to ensure that the equipment operates efficiently, which includes yearly inspections, preventive maintenance and repair services from our technical and engineering experts. Additionally, upgrade or retrofit options to address part obsolescence, enhance system performance, design, and software, and support long-term cost savings are available to all our customers.
On-Call and Onsite Assistance
For on-call and onsite assistance, NWL’s dedicated team is there to take your call. We work around the clock, ensuring that you have the help you need whenever you need it. NWL offers global, remote support anytime, regardless of your time zone.
Custom Engineering Solutions
We offer customized engineered products and services to meet your reliability requirements. It starts with a good understanding of the product need and the application environment and solid collaboration between the parties involved.
